이전: Ordinary Differential Equations, 상위 문서: Differential Equations [차례][찾아보기]
The function daspk can be used to solve DAEs of the form
0 = f (x-dot, x, t), x(t=0) = x_0, x-dot(t=0) = x-dot_0
where x-dot is the derivative of x. The equation is solved using Petzold’s DAE solver DASPK.
Solve a set of differential-algebraic equations.
daspk solves the set of equations
0 = f (x, xdot, t)
with
x(t_0) = x_0, xdot(t_0) = xdot_0
The solution is returned in the matrices 가로 and xdot, with each row in the result matrices corresponding to one of the elements in the vector t. The first element of t should be t_0 and correspond to the initial state of the system x_0 and its derivative xdot_0, so that the first row of the output 가로 is x_0 and the first row of the output xdot is xdot_0.
The first argument, 함수, is a string, inline, or function handle that names the function f to call to compute the vector of residuals for the set of equations. It must have the form
res = f (가로, xdot, t)
in which 가로, xdot, and res are vectors, and t is a scalar.
If 함수 is a two-element string array or a two-element cell array of strings, inline functions, or function handles, the first element names the function f described above, and the second element names a function to compute the modified Jacobian
df df
jac = -- + c ------
dx d xdot
The modified Jacobian function must have the form
jac = j (가로, xdot, t, c)
The second and third arguments to daspk specify the initial
condition of the states and their derivatives, and the fourth argument
specifies a vector of output times at which the solution is desired,
including the time corresponding to the initial condition.
The set of initial states and derivatives are not strictly required to
be consistent. If they are not consistent, you must use the
daspk_options function to provide additional information so
that daspk can compute a consistent starting point.
The fifth argument is optional, and may be used to specify a set of times that the DAE solver should not integrate past. It is useful for avoiding difficulties with singularities and points where there is a discontinuity in the derivative.
After a successful computation, the value of istate will be greater than zero (consistent with the Fortran version of DASPK).
If the computation is not successful, the value of istate will be less than zero and 안내 will contain additional information.
You can use the function daspk_options to set optional
parameters for daspk.
같이 보기: dassl.
Query or set options for the function daspk.
When called with no arguments, the names of all available options and their current values are displayed.
Given one argument, return the value of the option opt.
When called with two arguments, daspk_options sets the option
opt to value 값.
Options include
"absolute tolerance"Absolute tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the relative tolerance must also be a vector of the same length.
"relative tolerance"Relative tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the absolute tolerance must also be a vector of the same length.
The local error test applied at each integration step is
abs (local error in x(i))
<= rtol(i) * abs (Y(i)) + atol(i)
"compute consistent initial condition"Denoting the differential variables in the state vector by ‘Y_d’
and the algebraic variables by ‘Y_a’, ddaspk can solve
one of two initialization problems:
In either case, initial values for the given components are input, and initial guesses for the unknown components must also be provided as input. Set this option to 1 to solve the first problem, or 2 to solve the second (the default is 0, so you must provide a set of initial conditions that are consistent).
If this option is set to a nonzero value, you must also set the
"algebraic variables" option to declare which variables in the
problem are algebraic.
"use initial condition heuristics"Set to a nonzero value to use the initial condition heuristics options described below.
"initial condition heuristics"A vector of the following parameters that can be used to control the initial condition calculation.
MXNITMaximum number of Newton iterations (default is 5).
MXNJMaximum number of Jacobian evaluations (default is 6).
MXNHMaximum number of values of the artificial stepsize parameter to be
tried if the "compute consistent initial condition" option has
been set to 1 (default is 5).
Note that the maximum total number of Newton iterations allowed is
MXNIT*MXNJ*MXNH if the "compute consistent initial
condition" option has been set to 1 and MXNIT*MXNJ if it is
set to 2.
LSOFFSet to a nonzero value to disable the linesearch algorithm (default is 0).
STPTOLMinimum scaled step in linesearch algorithm (default is eps^(2/3)).
EPINITSwing factor in the Newton iteration convergence test. The test is
applied to the residual vector, premultiplied by the approximate
Jacobian. For convergence, the weighted RMS norm of this vector
(scaled by the error weights) must be less than EPINIT*EPCON,
where EPCON = 0.33 is the analogous test constant used in the
time steps. The default is EPINIT = 0.01.
"print initial condition info"Set this option to a nonzero value to display detailed information about the initial condition calculation (default is 0).
"exclude algebraic variables from error test"Set to a nonzero value to exclude algebraic variables from the error
test. You must also set the "algebraic variables" option to
declare which variables in the problem are algebraic (default is 0).
"algebraic variables"A vector of the same length as the state vector. A nonzero element indicates that the corresponding element of the state vector is an algebraic variable (i.e., its derivative does not appear explicitly in the equation set).
This option is required by the
"compute consistent initial condition" and
"exclude algebraic variables from error test" options.
"enforce inequality constraints"Set to one of the following values to enforce the inequality
constraints specified by the "inequality constraint types"
option (default is 0).
"inequality constraint types"A vector of the same length as the state specifying the type of inequality constraint. Each element of the vector corresponds to an element of the state and should be assigned one of the following codes
Less than zero.
Less than or equal to zero.
Not constrained.
Greater than or equal to zero.
Greater than zero.
This option only has an effect if the
"enforce inequality constraints" option is nonzero.
"initial step size"Differential-algebraic problems may occasionally suffer from severe scaling difficulties on the first step. If you know a great deal about the scaling of your problem, you can help to alleviate this problem by specifying an initial stepsize (default is computed automatically).
"maximum order"Restrict the maximum order of the solution method. This option must be between 1 and 5, inclusive (default is 5).
"maximum step size"Setting the maximum stepsize will avoid passing over very large regions (default is not specified).
Octave also includes DASSL, an earlier version of DASPK, and DASRT, which can be used to solve DAEs with constraints (stopping conditions).
Solve a set of differential-algebraic equations.
dassl solves the set of equations
0 = f (x, xdot, t)
with
x(t_0) = x_0, xdot(t_0) = xdot_0
The solution is returned in the matrices 가로 and xdot, with each row in the result matrices corresponding to one of the elements in the vector t. The first element of t should be t_0 and correspond to the initial state of the system x_0 and its derivative xdot_0, so that the first row of the output 가로 is x_0 and the first row of the output xdot is xdot_0.
The first argument, 함수, is a string, inline, or function handle that names the function f to call to compute the vector of residuals for the set of equations. It must have the form
res = f (가로, xdot, t)
in which 가로, xdot, and res are vectors, and t is a scalar.
If 함수 is a two-element string array or a two-element cell array of strings, inline functions, or function handles, the first element names the function f described above, and the second element names a function to compute the modified Jacobian
df df
jac = -- + c ------
dx d xdot
The modified Jacobian function must have the form
jac = j (가로, xdot, t, c)
The second and third arguments to dassl specify the initial
condition of the states and their derivatives, and the fourth argument
specifies a vector of output times at which the solution is desired,
including the time corresponding to the initial condition.
The set of initial states and derivatives are not strictly required to be consistent. In practice, however, DASSL is not very good at determining a consistent set for you, so it is best if you ensure that the initial values result in the function evaluating to zero.
The fifth argument is optional, and may be used to specify a set of times that the DAE solver should not integrate past. It is useful for avoiding difficulties with singularities and points where there is a discontinuity in the derivative.
After a successful computation, the value of istate will be greater than zero (consistent with the Fortran version of DASSL).
If the computation is not successful, the value of istate will be less than zero and 안내 will contain additional information.
You can use the function dassl_options to set optional
parameters for dassl.
Query or set options for the function dassl.
When called with no arguments, the names of all available options and their current values are displayed.
Given one argument, return the value of the option opt.
When called with two arguments, dassl_options sets the option
opt to value 값.
Options include
"absolute tolerance"Absolute tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the relative tolerance must also be a vector of the same length.
"relative tolerance"Relative tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the absolute tolerance must also be a vector of the same length.
The local error test applied at each integration step is
abs (local error in x(i))
<= rtol(i) * abs (Y(i)) + atol(i)
"compute consistent initial condition"If nonzero, dassl will attempt to compute a consistent set of initial
conditions. This is generally not reliable, so it is best to provide
a consistent set and leave this option set to zero.
"enforce nonnegativity constraints"If you know that the solutions to your equations will always be non-negative, it may help to set this parameter to a nonzero value. However, it is probably best to try leaving this option set to zero first, and only setting it to a nonzero value if that doesn’t work very well.
"initial step size"Differential-algebraic problems may occasionally suffer from severe scaling difficulties on the first step. If you know a great deal about the scaling of your problem, you can help to alleviate this problem by specifying an initial stepsize.
"maximum order"Restrict the maximum order of the solution method. This option must be between 1 and 5, inclusive.
"maximum step size"Setting the maximum stepsize will avoid passing over very large regions (default is not specified).
"step limit"Maximum number of integration steps to attempt on a single call to the underlying Fortran code.
Solve a set of differential-algebraic equations.
dasrt solves the set of equations
0 = f (x, xdot, t)
with
x(t_0) = x_0, xdot(t_0) = xdot_0
with functional stopping criteria (root solving).
The solution is returned in the matrices 가로 and xdot, with each row in the result matrices corresponding to one of the elements in the vector t_out. The first element of t should be t_0 and correspond to the initial state of the system x_0 and its derivative xdot_0, so that the first row of the output 가로 is x_0 and the first row of the output xdot is xdot_0.
The vector t provides an upper limit on the length of the integration. If the stopping condition is met, the vector t_out will be shorter than t, and the final element of t_out will be the point at which the stopping condition was met, and may not correspond to any element of the vector t.
The first argument, 함수, is a string, inline, or function handle that names the function f to call to compute the vector of residuals for the set of equations. It must have the form
res = f (가로, xdot, t)
in which 가로, xdot, and res are vectors, and t is a scalar.
If 함수 is a two-element string array or a two-element cell array of strings, inline functions, or function handles, the first element names the function f described above, and the second element names a function to compute the modified Jacobian
df df
jac = -- + c ------
dx d xdot
The modified Jacobian function must have the form
jac = j (가로, xdot, t, c)
The optional second argument names a function that defines the constraint functions whose roots are desired during the integration. This function must have the form
g_out = g (가로, t)
and return a vector of the constraint function values. If the value of any of the constraint functions changes sign, DASRT will attempt to stop the integration at the point of the sign change.
If the name of the constraint function is omitted, dasrt solves
the same problem as daspk or dassl.
Note that because of numerical errors in the constraint functions due to round-off and integration error, DASRT may return false roots, or return the same root at two or more nearly equal values of T. If such false roots are suspected, the user should consider smaller error tolerances or higher precision in the evaluation of the constraint functions.
If a root of some constraint function defines the end of the problem, the input to DASRT should nevertheless allow integration to a point slightly past that root, so that DASRT can locate the root by interpolation.
The third and fourth arguments to dasrt specify the initial
condition of the states and their derivatives, and the fourth argument
specifies a vector of output times at which the solution is desired,
including the time corresponding to the initial condition.
The set of initial states and derivatives are not strictly required to be consistent. In practice, however, DASSL is not very good at determining a consistent set for you, so it is best if you ensure that the initial values result in the function evaluating to zero.
The sixth argument is optional, and may be used to specify a set of times that the DAE solver should not integrate past. It is useful for avoiding difficulties with singularities and points where there is a discontinuity in the derivative.
After a successful computation, the value of istate will be greater than zero (consistent with the Fortran version of DASSL).
If the computation is not successful, the value of istate will be less than zero and 안내 will contain additional information.
You can use the function dasrt_options to set optional
parameters for dasrt.
같이 보기: dasrt_options, daspk, dasrt, lsode.
Query or set options for the function dasrt.
When called with no arguments, the names of all available options and their current values are displayed.
Given one argument, return the value of the option opt.
When called with two arguments, dasrt_options sets the option
opt to value 값.
Options include
"absolute tolerance"Absolute tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the relative tolerance must also be a vector of the same length.
"relative tolerance"Relative tolerance. May be either vector or scalar. If a vector, it must match the dimension of the state vector, and the absolute tolerance must also be a vector of the same length.
The local error test applied at each integration step is
abs (local error in x(i)) <= ...
rtol(i) * abs (Y(i)) + atol(i)
"initial step size"Differential-algebraic problems may occasionally suffer from severe scaling difficulties on the first step. If you know a great deal about the scaling of your problem, you can help to alleviate this problem by specifying an initial stepsize.
"maximum order"Restrict the maximum order of the solution method. This option must be between 1 and 5, inclusive.
"maximum step size"Setting the maximum stepsize will avoid passing over very large regions.
"step limit"Maximum number of integration steps to attempt on a single call to the underlying Fortran code.
See K. E. Brenan, et al., Numerical Solution of Initial-Value Problems in Differential-Algebraic Equations, North-Holland (1989) for more information about the implementation of DASSL.
이전: Ordinary Differential Equations, 상위 문서: Differential Equations [차례][찾아보기]